Researchers with the Department of Chemistry at Saint Louis University and the Department of Biomedical Engineering at Michigan State University see promise in using PolyJet Technology™ to help manufacture microfluidic devices. Compared to the labor-intensive and time-consuming traditional methods, 3D printing microfluidics devices is faster, easily customizable, and allows for better reproducibility. A major benefit of PolyJet technology is freedom from conventional fabrication constraints. The high-resolution capabilities of PolyJet 3D printers make creating the complex geometries required by microfluidics, such as small, enclosed channels, faster and less labor intensive. PolyJet technology replaces several processes that are typically required for creating microfluidics devices, removing the need for UV curing and layering.
With a PolyJet 3D printer, the team could produce a microfluidic chip in less than half an hour. While 3D printing microfluidic devices has traditionally come with serious drawbacks, PolyJet technology offers a solution for issues like surface quality, optical transparency, and material choice. The high resolution of PolyJet 3D printers allows the fabrication of truly microfluidic channels (125 x 54 μm), with complex geometries such as serpentine channels. PolyJet 3D printers also provide multi-material capabilities, and materials that range in texture and transparency. Many microfluidics devices require transparency for optical detection. For the cover layer of their microfluidic chip, the team used translucent acrylic-simulating VeroClear™. For ports and world-to-chip connections, the team used rubberlike Tango+, which enabled the construction of crucial pressure-based sealing and connecting tubing.
The team found that PolyJet materials were well-suited for both analyzing complex biological samples and the optical analysis of small molecules. Utilizing PolyJet technology allows for the creation of microfluidic devices that are more durable, more easily reproduced, and more efficiently produced than those created via traditional means. The team’s research on 3D printing and microfluidics is published in the journals Analytical Chemistry and Analyst, both available online.
