Suitable for medical devices which requires any contact with skin or mouth.
Perfect solution for wearables and fashion items.
Approved for on skin/In mouth testing.
The J55™ Prime extends the visual full-color offering to include tactile, textual, and sensory.
Learn More
The J35™ Pro is an affordable 3D PolyJet printer suitable for the shared office environment with multi-material capabilities for functional design / concept modeling.
Learn More
From ideation to creation, the J8 series helps you deliver better results in less time. Get products to market faster, saving money and ensuring customer satisfaction. Increase expertise, make your business resilient and serve as many needs as possible with one powerful technology.
Learn More| Property | J8 Series | J55 Prime, J35 Pro | |
| Vero™ContactClear | |||
| Tensile Strength | 50 – 65 MPa (7,252 – 9,427 psi) | 40 – 55 MPa (5,800 – 8,000 psi) | |
| Elongation at Break | 10 – 25% | 5 – 20% | |
| Modulus of Elasticity | 2,000 – 3,000 MPa (290.1 – 435.1 ksi) | 2,200 – 3,000 MPa (320,000 – 435,000 psi) | |
| Flexural Strength | 75 – 110 Mpa(10,878 – 15,954 psi) | 70 – 85 MPa (10,000 – 16,000 psi) | |
| Flexural Modulus | 2,200 – 3,200 Mpa (319.1 – 464.1 ksi) | 2,000 – 2,500 MPa (290,000 – 365,000 psi) | |
| HDT, °C & 0.45MPa | 45 – 50 °C(113 – 122 °F) | 45 – 50 °C(113 – 122 °F) | |
| HDT, °C & 1.82MPa | 45 – 50 J/m (113 – 122 °F) | 45 – 50 °C (113 – 122 °F) | |
| Izod Notched Impact | 20 – 30 (0.37 – 0.56 ft-lb/in) | 20 – 30 (0.375 – 0.562 ft-lb/in) | |
| Water Absorption | 1.1 – 1.5% | 1.1 – 1.5% | |
| Tg | 52 – 54 °C (126 – 130 °F) | 52 – 54 °C (126 – 129 °F) | |
| Shore Hardness (D) | 83 – 86 D | 83 – 86 (Scale D) | |
| Rockwell Hardness Scale | 73 – 76 M | -- | |
| Polymerized Density | 1.17 – 1.18 (g/cm3)(0.676 – 0.682 oz/in3) | 1.17 – 1.18 g/cm3 | |
| Biocompatibility | Skin contact – permanent (>30 days) Mucous membrane – short term (up to 24 hrs) |
||
| Sterilization Methods | Gamma sterilization1 using a dose of 25–50 kGy Steam sterilization2 for four (4) minutes at 132 °C (270 °F) with fractionated pre-vacuum. |
||
| Support Removal Type | WaterJet or soluble | WaterJet | |
