English
English
Case Study

Unlimited potential with additive manufacturing for CA-based manufacturing facility.


Abstract blue image.

Need for customization is driving 3D printing evolution.

The potential for additive. 

In its early years, 3D printing was led by rapid prototyping, with its capacity for fast, cost-effective parts. Today, 3D printing has evolved to the point where customization of end-use parts can lead production, and part quantities can be scaled to need, making zero inventory a reality. FATHOM, an Oakland, CA-based advanced manufacturing facility has been on board with 3D printing since it opened its doors in 2008, and sees unlimited potential for additive technology to disrupt the manufacturing supply chain.

This new Demonstrator is enabling us to look to the future where our production centre could look like a 3D printing server farm, where there’s just rows and rows of Stratasys Continuous Build 3D Demonstrators. That’s where our minds are going because the FDM-based technology is that good from a design and cost standpoint.

Pushing the limits of manufacturing.

FATHOM’s early adoption of the Stratasys Continuous Build 3D Demonstrator, a modular, automated FDM 3D manufacturing system with interconnected, high- throughput capabilities, is their solution. “This system is going to enable us to sell higher - volume FDM parts for AM application because it’s going to push the barrier of number of parts we can sell competitively,” said Stump. “Our opportunity here is setting up these modules for 1,000-plus parts, which I’m confident we can get to. Maybe even higher,” adds Stump. “And that’s just comparing apples to apples from a cost standpoint; that’s not taking into account designing for more function.” The manufacturer currently has a rack of six modules in their Oakland facility and Stump says this is only the beginning.

 

“This new Demonstrator is enabling us to look to the future where our production centre could look like a 3D printing server farm, where there’s just rows and rows of Stratasys Demonstrators. That’s where our minds are going because the FDM-based technology is that good from a design and cost standpoint.” The team at FATHOM is extremely excited about the opportunity this Continuous Build Demonstrator brings to drive scale and growth for its AM business. “It meets our customer’s demand for high-quality FDM parts in greater quantities within shorter lead times and is more cost-effective.”

A part produced with the Continuous Build
Demonstrator being ejected into the catch bin.
FATHOM, an advanced manufacturing facility, has utilized 3D printing since its inception

Having the Demonstrator in house lets FATHOM’s customers change design without penalty, tackle multiple jobs in parallel without downtime as well as automatically manage job requests. “This Demonstrator has the ability to take what’s already working at FATHOM and push the limits of additive manufacturing,” said Stump. One of their customers, Intel, worked with the team of advanced manufacturing experts at FATHOM to help design and fabricate Spider Bots for their keynote address at its annual developer’s conference. The complex project highlighted FATHOM’s cost-effective design and manufacturing capabilities, one with many design iterations during production. In the end, the Spider Bots produced by FATHOM were comprised of more than 9700 3D printed parts. “If we’d moulded those parts it would have cost approximately $400,000 and taken a few months. With 3D printing, we were able to complete the entire project in five weeks, charging Intel just $116,000,” said Stump.

 

“The demand for tool-less manufacturing is ever increasing. Designers and engineers want even greater design freedom and faster speeds so the opportunity with the new Demonstrator is significant.” Scalability is another factor the Demonstrator addresses for FATHOM. “With the growing adoption of direct digital manufacturing, more of our customers are placing these types of end-use orders.

All it takes is a few of our customers to submit just-in-time orders at once for our machines to max out on capacity,” said Stump. “The ability to be flexible with this new system, adding more as needed, is really great.” With the Continuous Build 3D Demonstrator, a total disruption of the supply chain is possible for just-in-time parts. “Customers can request what they need in their MRP system when they need it and inventory is available on time, every time, just-in-time.”

Download case study

Related Content

EPAK Maritime Satellite Antennas

EANT GmbH 3D Printed Metal Replacement for Antenna Mounts

Discover how EANT GmbH reduced production costs by 20% and time by 75% using Stratasys F900 & Nylon 12CF for lightweight, strong 3D-printed antenna mounts.

View more
Advanced design

Accelerate Product Design with Stratasys

Discover advanced rapid prototyping with Stratasys additive manufacturing solutions and elevate your product development to new heights with our detailed guide.

View more
SG Functional

It’s Time to Redefine Functional Prototyping

Your prototype shouldn’t be just a model but a fully functional replica of your final part or product, ready to undergo real-world trials.

View more
EPAK Maritime Satellite Antennas

Discover how EANT GmbH reduced production costs by 20% and time by 75% using Stratasys F900 & Nylon 12CF for lightweight, strong 3D-printed antenna mounts.

Advanced design

Discover advanced rapid prototyping with Stratasys additive manufacturing solutions and elevate your product development to new heights with our detailed guide.

SG Functional

Your prototype shouldn’t be just a model but a fully functional replica of your final part or product, ready to undergo real-world trials.