“In a production line where each operator may account for 200 parts, eliminating assembly errors is very important,” said Hirama. Operators had been tasked with determining the orientation and angle to place the part each time, making precision difficult. The first step for Ricoh was implementing the Stratasys Fortus 900mc 3D Printer, which enabled faster build time and the use of well- rounded thermoplastics for advanced applications. The company put in place a moveable trolley, equipped with 3D printed jigs, designed so it could move in the sequence of operation. This has further reduced “the quantity of tools needed by 40%, along with the associated management costs. These reductions are realised because electric tools individually optimised for fixed workbenches are no longer needed,” said Hirama. Utilising the high-flexibility of these plastic jigs enables the shape of the jigs to easily match the shape of the parts placed there.
“These jigs are ultralight yet fully-functional, which has helped turn the Ricoh industry assembly line into an example of innovative equipment,” said Hirama. Additionally, the trolley has reduced assembly errors and greatly shortened the time for new operators to become skilled from one week to two days,” said Hirama. “There used to be 12 assembly errors each month, on average,” said Hirama. “But there have been no assembly errors since the introduction of this new mobile workbench, made possible thanks to 3D printing.”
The factory floor at Ricoh continued to evolve as the special department moved from 3D printing a jig to designing jigs in optimised geometry and then 3D printing, further reducing the jig production time from two weeks to as little as a few hours. “Even complex shapes don’t increase lead times or cost,” said Taiki Saito, technical officer and senior development specialist. “Previously, shapes often changed before mass production so the jigs were not used in the pilot stage. But with 3D printing, jigs can be manufactured quickly so they are used from the beginning,” said Hirama. “The materials are high strength, heat-resistant and functional, which makes them well-matched to their purpose,” said Hirama. As for the materials used with the Fortus, “Fortus materials are anti-static which is no small thing given the high number of electronic parts used in manufacturing,” said Hirama. “We provide the know-how developed within Ricoh and deliver it to our customers as a service,” said Hirama. “We are excited to bring 3D printing into our business, from prototyping for R&D, to the manufacturing of tools and now for production,” said Taizo Sakagi, senior manager of business development, Ricoh.
